3 Short-Range Comms & IoT Mode
3.4 HRP UWB Demodulation Measurement
Min Search Offset + Search Length
Max Depends on System BW
3.4.8.4 Demod
Contains parameters for the UWB PHY layer.
Data Analysis
Enables analysis of the data portion of the frame (PHR+PSDU) to calculate the
power metrics and NRMSE result.
Remote
Command
[:SENSe]:HUWB:DATA:ANALysis[:STATe] OFF | ON | 0 | 1
[:SENSe]:HUWB:DATA:ANALysis[:STATe]?
Example
:HUWB:DATA:ANAL ON
:HUWB:DATA:ANAL?
Couplings Grayed-out when "STS Packet Configuration" on page 502 is After SFD, no data (3)
Preset
ON
State Saved Yes
Range
OFF|ON
Modulation Analysis
Enables the demodulation process to calculate NRMSE result.
Remote
Command
[:SENSe]:HUWB:MODulation:ANALysis[:STATe] OFF | ON | 0 | 1
[:SENSe]:HUWB:MODulation:ANALysis[:STATe]?
Example
:HUWB:MOD:ANAL ON
:HUWB:MOD:ANAL?
Preset
ON
State Saved Yes
Range
OFF|ON
Chip Clock Error Compensation
Enables or disables the internal adjustment in the timing of the chip clock.
Remote
Command
[:SENSe]:HUWB:COMPensation:CCLock[:STATe] OFF | ON | 0 | 1
[:SENSe]:HUWB:COMPensation:CCLock[:STATe]?
Short Range Comms & IoT Mode User's &Programmer's Reference 515