Keysight N9020B - Invert Polarity; Implicit Header; 3.3.8.4 Decode; Decode Enable

3 Short-Range Comms & IoT Mode
3.3 LoRa (CSS) Demodulation Measurement
Invert Polarity
Toggles the state of the invert polarity between on and off.
Remote Command
[:SENSe]:LORA:DEMod:PINVert[:STATe] OFF | ON | 0 | 1
[:SENSe]:LORA:DEMod:PINVert[:STATe]?
Example
:LORA:DEM:PINV ON
:LORA:DEM:PINV?
Preset
OFF
State Saved Yes
Range On|Off
Implicit Header
Toggles the state of the existence of the header between on and off. The header part
in a frame will be filled with payload bits if the state is On.
Remote Command
[:SENSe]:LORA:DEMod:IHEader[:STATe] OFF | ON | 0 | 1
[:SENSe]:LORA:DEMod:IHEader[:STATe]?
Example
:LORA:DEM:IHE ON
:LORA:DEM:IHE?
Preset
OFF
State Saved Yes
Range On|Off
3.3.8.4 Decode
Decode Enable
Toggles the state of decoding.
Remote Command
[:SENSe]:LORA:DECode:ENABle[:STATe] OFF | ON | 0 | 1
[:SENSe]:LORA:DECode:ENABle[:STATe]?
Example
:LORA:DEC:ENAB ON
:LORA:DEC:ENAB?
Preset
OFF
State Saved Yes
Range On|Off
Short Range Comms & IoT Mode User's &Programmer's Reference 409