Keysight N9020B - Page 58

Table Of Contents
6.1.4 RF Power 1924
6.1.5 T/R Port High Power Attenuator 1924
6.1.6 Amplitude Setup 1924
6.1.6.1 RF Power 1924
6.1.6.2 Set Reference Power 1928
6.1.6.3 Power Ref 1929
6.1.6.4 Power Unit 1929
6.1.6.5 Amptd Offset 1930
6.1.6.6 Amplitude Increment 1931
6.1.7 Frequency 1931
6.1.8 List Sequencer 1931
6.1.8.1 Sequencer 1932
6.1.8.2 Initiate Sequence 1932
6.1.8.3 Repetition 1933
6.1.8.4 Trig Out Type 1933
6.1.8.5 Select Data Marker 1933
6.1.8.6 Manual Trigger Now 1934
6.1.8.7 List Sequencer Setup 1934
Number of Steps 1934
Go To Step 1934
Insert Step Before 1935
Delete Step 1935
Clear List 1935
Step Trigger 1935
Transition Time 1936
Band 1937
Device 1941
Freq/Chan 1942
Power 1943
Waveform 1943
Waveform File 1944
Step Duration 1944
Duration Time 1945
Play Count 1946
Trig Out 1947
Step Configuration (Remote Command Only) 1947
Step Configuration of Step Trigger parameter list (Remote Command Only) 1949
Step Configuration of Transition Time parameter list (Remote Command Only) 1950
Step Configuration of Radio Band parameter list (Remote Command Only) 1950
Step Configuration of Radio Band Link parameter list (Remote Command Only) 1951
58 Short Range Comms & IoT Mode User's &Programmer's Reference