Table Of Contents
6.5.6.2 Freq Interpolation 2122
6.5.6.3 Transducer Unit 2124
6.5.6.4 Description 2125
6.5.6.5 Comment 2125
6.5.7 Complex Corrections 2126
6.5.7.1 Go To Row (Select Correction) 2127
6.5.7.2 Delete Row 2127
6.5.7.3 Delete All 2127
6.5.7.4 Correction On 2128
6.5.7.5 Correction Port 2128
6.5.7.6 Direction 2129
6.5.7.7 Description 2130
6.5.7.8 Comment 2130
6.5.7.9 File 2131
6.5.7.10 Freq Interpolation (Remote Command Only) 2131
6.5.7.11 Set Data (Remote Command Only) 2132
6.5.8 Apply Corrections 2132
6.5.9 Delete All Corrections 2133
6.5.10 Correction Group On/Off 2134
6.5.11 Break 2134
6.5.12 Reload Corrections From Files 2137
6.5.13 Edit Correction Group 2137
6.5.13.1 Go to Row 2137
6.5.13.2 Insert Row Below 2137
6.5.13.3 Delete Row 2138
6.5.13.4 Select File 2138
6.5.13.5 Specify File 2138
6.5.13.6 Remove File 2138
6.5.13.7 Correction Trace Display 2138
6.5.13.8 Description 2139
6.5.13.9 Comment 2139
6.5.13.10 Start Frequency 2139
6.5.13.11 Stop Frequency 2140
Short Range Comms & IoT Mode User's &Programmer's Reference 65
To Next Page
Loading...
