107
Keysight Handheld Analyzers
N99xxA User’s Guide
7 Time Domain – Option 010
With NA Mode, Time Domain (Opt 010), frequency information is used to
calculate and display measurements with time as the horizontal display axis.
The response values appear separated in time allowing a different perspective
of the test device's performance and limitations.
NA Mode settings that are NOT unique to Time Domain are documented in
Chapter 6, “NA (Network Analyzer) Mode”, on page 83.
In This Chapter
Time Domain (Transform) Settings
Trace Settings
“Overview” on page 109
“Transform Settings Table” on page 110
“Start/Stop (Frequency Range) and Points” on page 110
“Stimulus (Mode)” on page 111
“Set Frequency Lowpass” on page 111
“Start/Stop Time” on page 111
“Distance Units” on page 112
“Window Layout” on page 112
“Transform Window” on page 112
“Line Loss and Velocity Factor” on page 113
“Data Chain” on page 114
“Gating Type” on page 117
“Transform Enable” on page 115
“Gate Enable” on page 115
To Next Page
Loading...
