552 Keysight N9927-90001 User’s Guide
Instrument Calibration
What Are My Choices of Instrument Calibration?
What Are My Choices of Instrument Calibration?
The following types of instrument calibration are available from Keysight
Technologies service center:
Keysight Calibration
Includes the test data from the calibration and the
certificate of calibration, stating the instrument has been
calibrated and is operating within the published
specifications.
ANSI Z540
Calibration
Includes the test data from the calibration and the
certificate of calibration, stating the instrument has been
calibrated using a process in compliance with ANSI
Z540.1 and is operating within the published
specifications
ISO 17025
Calibration
Includes the test data from the calibration and the certificate of
calibration, stating the instrument has been calibrated using a process in
compliance with ISO 17025 and is operating within the published
specifications.Chapter 3, “CAT (Cable and Antenna Test) Mode.”
To Next Page
Loading...
Need help?
General
