Keysight N9913A User Manual

Keysight N9927-90001 User’s Guide 367
AM/FM Metrics (SA Only and Option 355)
Interpreting AM/FM Metrics Error Messages
Interpreting AM/FM Metrics Error Messages
This section discusses possible AM/FM Metrics error messages and how to
correct them.
Test Tone Not Found
A Test Tone Not Found message is displayed under the following
circumstances:
— FieldFox frequency span is too wide
— No side lobes are displayed in the results
Refer to the examples in “Test Tone Not Found - Example” on page 368 and
“Test Tone Not Found - Corrected Example” on page 369.

Keysight N9913A Specifications

General

Amplitude Accuracy	±0.5 dB
Tracking Generator	Yes
Operating Temperature	-10°C to +50°C
Storage Temperature	-40°C to +70°C
Dynamic Range	> 100 dB
Measurement Types	Cable and antenna analyzer, spectrum analyzer
Battery Life	4 hours (typical)
Impedance	50 Ohm
Distance-to-Fault (DTF)	Up to 1000 m
Interface	USB, LAN