347
Keysight Handheld Analyzers
N99xxA User’s Guide
20 ERTA (Extended Range Transmission Analysis) Mode -
Option 209
ERTA (also known as FoxTrot) uses two FieldFox units to make long-distance
scalar transmission measurements. One unit is the source and the other unit is
the Receiver.
In this Chapter
“Overview” on page 348
“Requirements and Limitations” on page 349
“Start Connection Wizard” on page 350
“Configure Measurement Settings” on page 354
“Select Measurement” on page 354
“Normalize” on page 355
“Source Tracking Offset and Offset Reversal” on page 355
“Improve Dynamic Range” on page 356
“Source Enable and Source Mode” on page 356
To Next Page
Loading...
