Keysight PNA-X Series Configuration Guide

Page 38
Find us at www.keysight.com
1. For on-wafer applications, two 11500J/K/L cables are required; one
cable for each test port.
For devices with 1.0 mm connectors
Mechanical calibration/verification kit
85059B DC to 120 GHz precision calibration kit. Includes:
– 85059-60027 1.0 mm (m) short, 1.3 mm
– 85059-60029 1.0 mm (m) short, 2.45 mm
– 85059-60031 1.0 mm (m) short, 3.326 mm
– 85059-60033 1.0 mm (m) short, 4.039 mm
– 85059-60028 1.0 mm (f) short, 1.3 mm
– 85059-60030 1.0 mm (f) short, 2.45 mm
– 85059-60032 1.0 mm (f) short, 3.326 mm
– 85059-60034 1.0 mm (f) short, 4.039 mm
– 85059-60053 1.0 mm (m) open
– 85059-60054 1.0 mm (f) open
– 85059-60019 1.0 mm (m) 50 GHz load
– 85059-60020 1.0 mm (f) 50 GHz load
– 85059-60044 1.0 mm m-m adapter
– 85059-60045 1.0 mm f-f adapter
– 85059-60046 1.0 mm m-f adapter
– 8710-2812 6 mm 4 in-lb torque wrench
– 8710-2813 14 mm 4 in-lb torque wrench
– 8710-2156 6 mm open-end wrench
Cables
– 11500I 1.0 mm (f-f) test port cable (8.8 cm)
– 11500J 1.0 mm (m-f) test port cable (16.0 cm)
1
– 11500K 1.0 mm (m-f) test port cable (20.0 cm)
1
– 11500L 1.0 mm (m-f) test port cable (24.0 cm)
1
Adapter set
– V281C 1.0 mm(f) to V-band waveguide adapter
– V281D 1.0 mm (m) to V-band waveguide adapter
– W281C 1.0 mm (f) to W-band waveguide adapter
– W281D 1.0 mm (m) to W-band waveguide adapter
– 11920A 1.0 mm (m) to 1.0 mm (m) adapter
– 11920B 1.0 mm (f) to 1.0 mm (f) adapter
– 11920C 1.0 mm (m) to 1.0 mm (f) adapter
– 11921A 1.0 mm (m) to 1.85 mm (m) adapter
– 11921B 1.0 mm (f) to 1.85 mm (f) adapter
– 11921C 1.0 mm (m) to 1.85 mm (f) adapter
– 11921D 1.0 mm (f) to 1.85 mm (m) adapter
– 11922A 1.0 mm (m) to 2.4 mm (m) adapter
– 11922B 1.0 mm (f) to 2.4 mm (f) adapter
– 11922C 1.0 mm (m) to 2.4 mm (f) adapter
– 11922D 1.0 mm (f) to 2.4 mm (m) adapter
– 11923A 1.0 mm (f) connector launch assembly
For devices with 1.85 mm connectors
Mechanical calibration kit
85058B standard: DC to 67 GHz. Includes:
– 85058-60101 1.85 mm (m) short 5.4 mm
– 85058-60102 1.85 mm (m) short 6.3 mm
– 85058-60103 1.85 mm (m) short 7.12 mm
– 85058-60104 1.85 mm (m) short 7.6 mm
– 85058-60105 1.85 mm (f) short 5.4 mm
– 85058-60106 1.85 mm (f) short 6.3 mm
– 85058-60107 1.85 mm (f) short 7.12 mm
– 85058-60108 1.85 mm (f) short 7.6 mm
– 85058-60109 1.85 mm male open
– 85058-60110 1.85 mm female open
– 85058-60111 1.85 mm male load
– 85058-60112 1.85 mm female load
– 85058-60113 1.85 mm (m) to 1.85 mm (m) adapter
– 85058-60114 1.85 mm (f) to 1.85 mm (f) adapter
– 85058-60115 1.85 mm (m) to 1.85 mm (f) adapter
85058E economy: DC to 67 GHz. Includes:
– 85058-60101 1.85 mm (m) short 5.4 mm
– 85058-60105 1.85 mm (f) short 5.4 mm
– 85058-60109 1.85 mm male open
– 85058-60110 1.85 mm female open
– 85058-60123 1.85 mm male load
– 85058-60124 1.85 mm female load
– 85058-60113 1.85 mm (m) to 1.85 mm (m) adapter
– 85058-60114 1.85 mm (f) to 1.85 mm (f) adapter
– 85058-60115 1.85 mm (m) to 1.85 mm (f) adapter

Keysight PNA-X Series Specifications

General

Output Power	+13 dBm (typical)
Number of Ports	2 or 4
Dimensions	426 mm (W) x 470 mm (D)
Power Requirements	100 to 240 VAC, 50/60 Hz
Frequency Range	10 MHz to 26.5 GHz (varies by model)