Keysight PNA-X Series Configuration Guide

Page 46
Find us at www.keysight.com
Verification kits
All Keysight verification kits include:
– Precision Z
0
airline or match thru
– Mismatched airline or mismatch thru
– Fixed attenuators (except 85059V)
– Traceable measured data and uncertainties
85051B 45 MHz to 18 GHz 7 mm kit
Includes attenuators, airline and mismatch airline with data on a
USB drive for use in confirming calibrated system performance,
traceable to national standards. Test procedure is provided in the
service manual.
85053B 300 kHz to 26.5 GHz 3.5 mm kit
Includes attenuators, airline and mismatch airline with data on a
USB drive for use in confirming calibrated system performance,
traceable to national standards. Test procedure is provided in the
service manual.
85055A 300 kHz to 18 GHz Type-N kit
Includes attenuators, airline and mismatch airline with data on a
USB drive for use in confirming calibrated system performance,
traceable to national standards. Test procedure is provided in the
service manual.
85057B 45 MHz to 50 GHz 2.4 mm kit
Includes attenuators, airline and mismatch airline with data on a
USB drive for use in confirming calibrated system performance,
traceable to national standards. Test procedure is provided in the
service manual.
85058V 45 MHz to 67 GHz 1.85 mm kit
Includes attenuators, match thru and mismatch thru with data on
a USB drive for use in confirming calibrated system performance,
traceable to national standards. Test procedure is provided in the
service manual.
85059V 10 MHz to 110 GHz 1.0 mm kit
Includes a matched airline (85059-60048) and a mismatch airline
(85059-60047), with data on a USB drive for use in confirming
calibrated system performance traceable to national standards.
Test procedure is provided in the service manual.
Q Band
Q11644A standard, WR-22: 33 to 50 GHz. Includes:
– 11644-60005 Q-band termination
– 11644-20004 Q-band short
– 11644-20001 Q-band shim
– 11644-60002 Q-band 10 cm straight waveguide
– 11644-60017 Q-band 5 cm straight waveguide
U Band
U11644A standard, WR-19: 40 to 60 GHz. Includes:
– 11644-60006 U-band termination
– 11644-20004 U-band short
– 11644-20002 U-band shim
– 11644-60003 U-band 10 cm straight waveguide
– 11644-60018 U-band 5 cm straight waveguide
V Band
V11644A standard, WR-15: 50 to 75 GHz. Includes:
– 11644-60025 V-band termination
– 11644-20015 V/W-band short
– 11644-20013 V-band shim
– 11644-60012 V-band standard section
W Band
W11644A standard, WR-10: 75 to 110 GHz.Includes:
– 11643-60026 W-band termination
– 11644-20015 V/W-band short
– 11644-20014 W-band shim
– 11644-60013 W-band standard section
General Accessories
Spare drive
1
– N5242-60134 Windows 7 spare drive with mounting cradle
for all N522x/3x/4xB models with 2.2 GHz CPU (version 7)
For information about spare drives for older PNA models, please
refer to the configuration guide 5990-7745EN.
Probe
– 85024A high-frequency probe; provides high-impedance
in-circuit test capability from 300 kHz to 3 GHz.
Power meters and sensors
2
– Recommended for self support, adjustments and
performance tests to verify proper instrument operation.
– USB power sensors
– U848x Series USB thermocouple power sensors
– U2020 X-Series USB peak and average power sensors
– U2000 Series USB power sensors
– U2040 X-Series USB and LAN power sensors
– Power meters
– P Series power meters (N1911A and N1912A) and all
supported sensors
– EPM Series power meters (N1913A and N1914A) and all
supported sensors
– EPM-P Series power meters (E4416A and E4417A) and all
supported sensors
– E Series power meters (E4418 and E4419) and all supported
sensors
– HP 437B/438A power meters

Keysight PNA-X Series Specifications

General

Output Power	+13 dBm (typical)
Number of Ports	2 or 4
Dimensions	426 mm (W) x 470 mm (D)
Power Requirements	100 to 240 VAC, 50/60 Hz
Frequency Range	10 MHz to 26.5 GHz (varies by model)