Driving your vehicle
1045
Smart Cruise Control (SCC)
Decreasing set speed
僅 Push down the - switch, and release it
immediately. The set speed will
decrease by 1 km/h (1 mph) each time
the switch is operated in this manner.
僅 Push down the - switch, and hold it
while monitoring the set speed on the
cluster. The set speed will decrease by
10 km/h or 5 mph each time the
switch is operated in this manner.
僅 Release the switch at the speed you
want to maintain. Speed cannot be set
below 30 km/h (20 mph).
Temporarily canceling Smart
Cruise Control
Press the switch or depress the
brake pedal to temporarily cancel Smart
Cruise Control.
Resuming Smart Cruise Control
To resume Smart Cruise Control after
the function was canceled, push the +, -
or switch.
If you push the + switch up or - switch
down, vehicle speed will be set to the
current speed on the cluster.
If you push the switch, vehicle
speed will resume to the preset speed.
Check the driving condition before press
the switch. Driving speed may
sharply increase or decrease when you
press the switch.
Turning off Smart Cruise Control
Press the Driving Assist button to turn
Smart Cruise Control off.
If your vehicle is equipped with Manual
Speed Limit Assist, press and hold the
To Next Page
Loading...
