11
ALWAYS CHECK THE OWNER’S MANUAL FOR COMPLETE OPERATING INFORMATION AND SAFETY WARNINGS. *IF EQUIPPED †LEGAL DISCLAIMERS ON BACK INSIDE COVER
Blind-Spot Collision-
Avoidance Assist (BCA)
Video
To view a video on your
mobile device, snap this
QR Code or visit the listed
website.
Refer to inside front cover
information.
www.youtube.com/KiaFeatureVideos
QR CODE
Blind-Spot Collision-Avoidance Assist (BCA)*
†6a
BCA is designed to help alert the driver before changing lanes. BCA uses a front-view
camera on the front windshield and rear-corner radar sensors in the rear bumper to
help alert the driver and temporarily apply braking in certain situations if it detects an
approaching vehicle in the driver’s blind spot area.
To turn BCA on, go to User Settings by pressing the Mode button on the Steering Wheel
or the Vehicle Settings* on the audio head unit. Select Driver Assistance > Blind-Spot
Safety. Then select Active Assist, Warning Only or Off.
Warning Only – The Warning Only setting will activate the 1st and 2nd stage alerts:
1st-stage: When another vehicle is detected within the BCA system warning boundary
A
, a yellow indicator will illuminate on the outside rearview mirrors
B
.
2nd-stage: When the 1st stage alert is on and the driver activates a turn signal, a
flashing yellow indicator will illuminate on the outside rearview mirrors and the system
will sound a warning.
To set the initial warning activation time, go to the settings > Driver Assistance
> Warning Timing. Then select the Normal or the Late option.
Active Assist – When Active Assist is selected in the settings, BCA may activate
the Electronic Stability Control (ESC) and temporarily apply braking power when an
approaching vehicle is detected within a certain distance next to or behind the vehicle.
A warning message may appear on the Instrument Cluster LCD.
BCA is a supplemental system. Do
not solely rely on this system and
always pay attention to the road and
its conditions.
See section 5 in the Owner’s Manual
for more detailed information,
limitations and conditions.
REMINDERS:
• BCA will not issue a warning if the vehicle is
passing at a high speed
• When BCA is ON and the ignition is cycled,
BCA returns to its previous state
The above images are for illustrative
purposes only and may not reflect
actual operation.
A
B
• The BCA Warning Volume can be adjusted in the User Settings or the Vehicle Settings* on
the audio head unit
• Conditions for the BCA to operate:
– Warnings: When the vehicle is traveling faster than 12 mph
– Active Assist: When the vehicle is traveling at least 40 mph
– Other vehicle detected on the side or the rear of the vehicle
QUICK TIPS
ADVANCED DRIVER ASSISTANCE SYSTEMS (ADAS)
ADAS
To Next Page
Loading...
Need help?
General
