TM0024 Page 28 of 33 Issue 2.01
CHAPTER 6
SET MENU
6.SET MENU
Selection of the Set menu feature will allow the selection of the sub menu features as
shown in figure 5.0. The sub menus can be selected by operation of either the arrow
keys or by operation of the corresponding numeric key and confirming selection by
operation of the Enter key.
Access Level 2 Set
Time and date
Printer status
Activate day mode
Select option using ↑ ← and
↵
Figure 5.0
6.1 TIME AND DATE
This selection allows the time and date to be entered into the control panel. The time
and date can be selected by operation of the arrow keys and/or the numeric keys and
confirming the selection by operation of the Enter key. As the information is entered
into the last position of the line operation of the Enter key will cause the next entry
line to appear.
Access Level 2 Set
Time: 02:47 PM FRI 04 OCT 1997
Set time 10:47 (hours:minutes)
Time style AM PM 24 hr
Set date _4/10/97
(day/month/year)
Enter date and
↵
figure 5.1
When entering information into the time and date lines entry of a two figured number
via the numeric keys will move directly to the next entry position. If a single number
is entered operation of the Enter key will then move to the next position.
To Next Page
Loading...