CMACEWHEEL EBIKES CO., LTD
info@cmacewheel.com
Backlight brightness setting interface
6.4 Display Unit Setting
Short press “MODE” button to enter the setting option. The setting parameters are Km/h and Mile/h.
The default Km/h unit is metric. Km/h or Mile/h can be selected by pressing “UP” and “DOWN”
button. Km/h means the unit is metric system, and Mile/h means the unit is Imperial system. Long
press “MODE” button to return to the setting list interface.
Display unit setting interface
6.5 Speed sensor magnetic stone number setting
Speed measuring magnetic stonel number setting interface, the setting parameters can be 0-99. The
default value of 1 indicates that the number of external speed measuring magnets is 1. The number
of magnetic steels can be selected by pressing the [up] key and the [dowm] key. Long press [mode] to
save the settings and return to the main interface.
To Next Page
Loading...
Need help?
General
