CMACEWHEEL EBIKES CO., LTD
info@cmacewheel.com
2.3 Button definitio
There are 5 buttons on K5242, In the following introduction， is named as 【MODE】。
is named as【UP】， is named as【DOWN】。 is named as 【POWER ON】
3.Note for Users
Be care of the safety use. Don’t attempt to release the connector when battery is on power.
Try to avoid hitting.
Don’t split the waterproof sticker to avoid affecting the waterproof performance.
Don’t modify system parameters to avoid parameters disorder.
Make the display repaired when error code appears.
4.Installation Instruction
When the e-bike is powered off, you can insert the connector of display and the corresponding
connector of controller to complete the installation, and adjust the display to a suitable angle.
5.User Settings
5.1 On / Off
Long press “MODE” button then the display will work normally, and the controller will power on at
the same time.
To Next Page
Loading...
