CMACEWHEEL EBIKES CO., LTD
info@cmacewheel.com
PAS Magnetic Number setting interface
7.USB charging function
A USB interface with charging function is installed under the N5 button. This interface provides
charging power for the mobile phone, and the output current is 500mA. When the display is turned
off, connect the data cable of the mobile phone to the display and the mobile phone. After the
display is turned on, the mobile phone will display charging; If the display is turned off at this time,
the phone will stop charging. When the display is turned on, press and hold the [mode] and [up] keys
and the [dowm] keys at the same time. After pressing and holding for a period of time, the
instrument starts to charge the mobile phone. In any state, unplug the phone and the charging will be
automatically terminated.
8. Preparation Before Startup
Please read the instruction carefully before using the display.
9. FAQ
Q: Why can’t turn on the display?
A: Please check whether the battery is turned on or the leakage lead wire is broken
Q: How to deal with the error code display?
A: Contact the e-bike maintenance station in time.
To Next Page
Loading...
Need help?
General
