CMACEWHEEL EBIKES CO., LTD
info@cmacewheel.com
Driver Mode Setting interface
6.8 PAS Power Sensitivity Setting
Short press “MODE” button to enter the setting interface. The setting range is 3 to 24. 3 is the highest
sensitivity, 24 is the lowest. Press “UP/DOWN” button to select sensitivity value, Default setting is 3.
Long press “MODE” button to confirm and return to the setting selection interface.
PAS Power Sensitivity Setting
6.9 PAS power start strength setting
Short press “MODE” button to enter the setting interface. The setting range is 0 to 5. Press
“UP/DOWN” button to select start strength value, Default setting is 3. Long press “MODE” button to
confirm and return to the setting selection interface.
To Next Page
Loading...
