Document No. 480-16FUM-002.A00
Kingston MobileLite Wireless G2
Connecting to MobileLite Wireless G2 over Wireless
MobileLite Wireless is its own independent wireless network. When browsing for Wi-Fi networks from your iPad
or iPhone, you will see ‘MLWG2-XXXX’ in the list of available networks to join.
Settings App --> Wi-Fi option --> Choose a Network-> MLWG2-XXXX by default (XXXX indicates the last four
characters of the device’s unique MAC address. The MAC address of your device could be found on the bottom
of the MobileLite Wireless G2)
By default, there is no password and when you connect to MobileLite Wireless G2 from your iOS device, you are
establishing a dedicated link to MobileLite Wireless G2 over that wireless signal. Once you connect to MobileLite
Wireless G2, you will substitute your iPad/iPhone’s Internet connection with MobileLite Wireless’s wireless
connection. This means you will no longer have access to the Internet. However, MobileLite Wireless G2 does
provide a bridging function that allows you to maintain access to MobileLite Wireless’s content while connecting to
a Wi-Fi Internet connection. See Page 23.
To Next Page
Loading...
