Chapter 2 Basic Operations 2-22
2. 6 Copying (for KIP 660)
1. Press [COPY] in UI Home screen.
The UI screen may vary depending on your system configuration.
(Shown with available options)
2. There are several size markings on Original Table which indicate possible feed positions.
Line up Original Guides (1) with the proper
markings according to the original width.
3. Place the original on the Original Table with face up.
Then insert it under the Scanner Unit along with Original Guides.
When the leading edge touches the original feeding roller, the machine automatically carries and
sets the original at the proper position.
Please refer to the detailed procedure for making a copy, which is included in "GUIDES" in UI
Home screen as well.
1
To Next Page
Loading...
