Chapter 1 Before Use 1-8
1. 4. 3 Scanner part
Subject Specification
Scanning method Contact Image Sensor (CIS)
(5 pieces of A4 sized CIS)
Light source LED (R/G/B)
Setting of original Face up
Starting point of scan Center
Scan width Max: 914.4mm / 36”
Min : 210mm
Scan length Max: 6,000mm / 19.7ft (Including the margin area)
(If the print is longer than 6,000mm, its image quality or the
reliability of paper feeding is not guaranteed.)
Min : 210mm / 8.5” (Including the margin area)
Margin area 3mm from leading, trailing and both side edges
Optical resolution 600dpi
Digital resolution 200 / 300 / 400 / 600 dpi
Original transportation Sheet through type
Transportable original
thickness
Max: 1.60mm
Min : 0.05mm
Scanning speed Monochrome : 65mm/s (mono 600dpi max)
Grayscale : 65mm/s
Color : 22mm/s
The actual speed may vary by the scan software.
-The above specifications are subject to change without notice.
NOTE
Image quality for an original with 0.25mm or thicker is
guaranteed only in a standard size even the scanner
physically accepts it.
To Next Page
Loading...
