KIRLOSKAR OIL ENGINES LIMITED
8
f) Apply Grease/Oil to all links, pins and rivets.
g) Wash and clean the machine periodically.
h) Check Tyre pressure after 15 days.
i) Keep Machine in level platform.
4.3 Don’ts
1. Do not operate the Mega T on road / highway.
2. Don’t operate the Mega T without any Demonstration training.
3. Do not operate both clutch – brake lever and steering controls together during the start of the engine.
4. Do not operate if you found any leakage of Fuel or lubricants.
5. Do not allow Mega T to go forward on a slope in neutral position;
6. Do not operate Mega T, on greater slopes or on any excessive steep slope by operating both steering
levers.
7. Never make a sudden turn at high speed. Never drive the Mega T at high speed in rough road.
8. Never place your hands, feet, or any part of your body near or under any moving part while the Mega T
engine is running.
9. Do not touch the muffler and engine when the machine is in use.
10. Do not use this machine around large roots and surface rocks.
11. Do not use this machine around underground pipes and wiring.
12. Do not use machine when fuel leakage is observed near FIP, Injector and Fuel lines Never operate near
drop-offs, ditches, or edges; wet, or slippery slopes.
13. Never park the tow vehicle on a steep grade or slope.
14. Do not operate the machine without good visibility.
15. Do not use the reverse gear for any field applications.
16. Do not tamper with any safety devices or fittings.
17. Do not use unapproved attachments.
18. Don’t use non recommended blades.
19. Disengage clutch before shifting gear
20. Ensure gears are aligned properly during shifting and if not release clutch to align the gear.
To Next Page
Loading...
Need help?
General
