23
OWNERS Manual
• Shift Clutch & Brake Lever (CBL) to disengage position.
•
Lo
ose the allen screw and maintain approx. 1mm gap between spring and allen. Take care not to load
the spring too much & at the same time parking brake should operate.
8.4 Steering Adjustment
• Keep machine in straight position and check both steering lever for correct operation.
•
• Operate steering lever to disengage transmission from steering gears. Now try to move Mega T right
and
left side. It should move freely.
• If there is restriction in movement, then loosen steering lever locking nut. Now loosen steering cable
locking nut and rotate it in clockwise or anti clockwise direction to adjust length. After adjusting,
tighten steering lever locking nut.
Step-1 Step-2
Step-3
To Next Page
Loading...
