1
OWNERS Manual
1. MEGA T Warranty Period and Warranty Policy Guide Lines
1
.1 Warranty Period
1.2 Warranty Policy Guide Lines
1. The warranty period shall start from the date of purchase of product and applicable to the first
purchaser on receipt of the warranty Registration Card.
2. The warranty only covers the manufacturing defect or defective part within the specified warranty
timeframe only.
3. The warranty will cease if Service maintenance is not carried out as per periodical maintenance
schedule.
4. Warranty voids if KOEL genuine parts or approved blades are not used on machine during periodical
maintenance.
5. The warranty will not cover for normal wear & tear of parts such as brake lining, clutch plate, drive
belt, rubber parts, plastic parts, electrical parts.
6. Under warranty period, only repair or replacement of defective parts will be considered,
replacement of the machine is not warranted.
7. Warranty is not transferable to the second and subsequent owners.
8. The warranty ceases if the machine is serviced or repaired by unauthorized persons or at any Local
workshop.
9. The warranty will not cover for any accidental damage, fire, collision, improper usage, tampering,
customer abuse and external modifications/fabrications done by the customer.
KOEL reserves the right to refuse warranty if the product was found not to be carried periodical
maintenance & installed as per our installation instructions.
Sl. No. Product Warranty Coverage
1 Machine ( Engine, Transmission) 12 months from Date of Sale to First Purchaser
2
Proprietary parts,
Like:
Fuel Injection Pump, Fuel Injector, Tyre,
Battery, Alternator & Starter Motor etc.
Warranties for Proprietary parts are subject to
respective manufactures as per their warranty policy
and guidelines.
3 Accessories / Implements Will not be covered
To Next Page
Loading...
Need help?
General
