Name: KITO ER2 Series
Brand: KITO
Rating: 4 (1 reviews)

To Next Page

To Previous Page

For disassembly and reassembly, prepare the following tools.

No. Tool name Application Icon

Wrench

10mm / 13mm / 17mm / 19mm

Bolts and nuts

Hexagon wrench

4mm / 5mm / 6mm / 8mm / 10mm

Socket bolts

3 Snap ring pliers S (Large) (Small) Snap rings (shaft)

4 Snap ring pliers R Snap rings (hole)

5 Socket wrench 10mm Bottom yokes

6 Combination pliers Split pins

7 Adjustable wrench

8 Plastic hammer

9 Screwdrivers (+)(-)

10 Puller Bearing, fan, brake, hub

11 Thickness gauge

12 Torque wrench/nut runner

13 Plier Set pin

●

Use the following types of grease.

• JIS K2220 Grease type 1 No.2 for Roller shaft bearing

• Molybdenum disulfide lubricant Molytherm No.2 (Specified brand: SUMICO LUBRICANT)

●

Helpful tools

• Remover: Prepare a remover for bearings (for inner race & outer race) and one for oil seal for precise operation.

• Preparing two wooden blocks (used as sleepers) and wire for guiding lead wires will be helpful.

Disassembly and assembly tools

Torque

Other manuals for KITO ER2 Series

Questions and Answers:

Need help?

Do you have a question about the KITO ER2 Series and is the answer not in the manual?

General