53
5.4 REGULAR MAINTENANCE CHECKS
OILS AND LUBRICANTS
Regular lubricaon is needed to the machine to prevent excessive wear of moving parts. Never mix dierent types of oil as this
could cause problems for the machine. When topping up, always use pre-ltered oils (max. lter grade: 9, NAS 1638-18/14 ISO
4406).
NOTE!! Please dispose of waste oil safely, in accordance with the Hazardous Waste Regulaons.
The following grades of lubricants are recommended for ambient temperatures ranging from -20°C to +40°C; for use in other
temperatures please contact the KLUBB Service Department for advice.
LUBRICATION POINTS
1) Lubricate the telescopic arm and the outrigger feet where illustrated regularly, as required.
2) Check the lubricaon of the rotaon system, plaorm and stabilisers every 3 months as part of the maintenance
schedule
OIL ISO Grade 32 GREASE EP2 Lithium
To Previous Page