KMB NOVAR-1007 - User Manual

KMB systems, s.r.o.
Dr. M. Horákové 559, 460 06 Liberec 7, Czech Republic
tel. +420 485 130 314, fax +420 482 736 896
email : kmb@kmb.cz, internet : www.kmbsystems.eu
6/2014
Power Factor Controllers
NOVAR-1106 / 1114 / 1206 / 1214 / 1414
NOVAR-1xxx / S400
NOVAR-1005 / 1007 / 1005D / 1007D
NOVAR-1312, NOVAR-1312-3
Firmware v. 1.7 / 1.2 ( N1312 )
Operating Manual

Summary

2. INSTALLATION

2.2 Electrical Connections

Detailed instructions for connecting power supply, measurement voltage/current, relays, and communication interfaces.

3. PUTTING IN OPERATION

3.1 Initial Setup Procedures

Steps for first use, including automatic configuration detection and section power recognition.

4. OPERATION

4.1 Setup and Parameter Configuration

4.2 Alarm and Fault Management

Setting up and managing alarms, indications, actuations, and limits for fault conditions.

7. WIRING EXAMPLES

Wiring Diagrams for Novar Controllers

8. TECHNICAL SPECIFICATIONS

Technical Specifications Summary

9. MAINTENANCE, TROUBLESHOOTING

Maintenance and Troubleshooting Guide

Information on maintenance, troubleshooting, and warranty details for Novar controllers.

KMB NOVAR-1007 Specifications

General

Input Voltage	24V DC
Power Consumption	5W
Communication Interface	RS-485
Protection Class	IP20
Humidity Range	non-condensing