KMB NOVAR-1007 - Novar1414; History of Firmware Versions

Novar 1xxx KMB systems
7
1.6 Novar1414
Novar1414 measures current in all 3 phases and it is designed for applications with variable load
unbalance. From Novar1214 type it differs only in additional current inputs. Description of specific
Novar-1414 properties is given in a separate chapter.
Tab. 1.1 : Novar1000-line PFC Model Overview
design [mm]
model
outputs
R = relay,
T=transistor
sensitivity
[mA]
meas. volt.
separated
from supply
2
nd
tariff
input
supply volt.
up to 500 V
relay common
pole separat.
temp. meas.
& fan control
fast
compensation
optional
remote
communicatio
panel
144x144
panel
96x96
DIN-bar
3-phase
controller
1005 5+1 R 20
 
1007 7+1 R 20
 
1005D 5+1 R 20
 
1007D 7+1 R 20
 
1106 6 R 2
  
1114 14 R 2
  
1206 6 R 2
    
1214 14 R 2
    
1106/S400
6 R 2
    
1114/S400
14 R 2
    
1206/S400
6 R 2
      
1214/S400
14 R 2
      
1312 12T+ 2R
2
     
1312-3 12T+ 2R
2
      
1414 14 R 2
     
1.7 History of Firmware Versions
version date of release note
1.0 3/2006 - basic version
1.1 4/2007 - 2nd metering rate functionality bug fix
- linear switching mode added to parameter 21
1.2 9/2007 - external alarm (No. 14) function added
1.3 12/2010 - offset function and Ethernet comm. interface option added, RS-
232 option cancelled, choke control improved
1.4 11/2011 - choke control limitation change ( par. 27 ) at offset ( par. 63 );
- communication optimization
1.5 5/2012 - choke control basic mode optimization; C/k
MIN
evaluation change
1.6 4/2014 - THD & CHL alarm behaviour correction at voltage fail
1.7 6/2014 - MaxTHD & MaxCHL values correction