Knick Stratos MS A405 Series - Start-Up; Calibration and Maintenance in the Lab

14
Memosens Sensors
Start-Up
When a Memosens sensor is connected, the appropriate measuring function
(device type) is automatically loaded.
Changing the Measuring Function
In the “Service” menu you can select another measuring function at any time.
Calibration and Maintenance in the Lab
The “MemoSuite” software allows calibrating Memosens sensors under reproducible
conditions at a PC in the lab. The sensor parameters are registered in a database.
Documenting and archiving meet the demands of FDA CFR 21 Part 11. Detailed
reports can be output as csv export for Excel. MemoSuite is available as accessory
and comes in the versions “Basic” and “Advanced”: www.knick.de.
Function selection:
The selected func-
tion is highlighted.
Connected sensor:
sensor type, manu-
facturer, order code
and serial number,
measuring point and
tag number
Last adjustment
Conductivity
1.010 mS/cm
Measured values
Conductivity
Resistance
Temperature
1.010 mS/cm
1.00 kΩ
25 °C
Sensor data
Sensor type:
Manufacturer:
Order code:
Serial number:
Conductivity
Knick
SE630-MS
11003
Adjustment data
Date:
Cell constant:
4/27/2015 20:09:12
1.01 1/cm
StartCenter Calibration Table View History Statistics pH Buers
Sensor type:
Manufacturer:
Conductivity
Knick
Order code:
Serial number:
SE630-MS
11003
Measuring point:
Tag number: 7
Change
Change
Show
Connected sensor: sensor type, manufacturer,
order code and serial number
Settings and
specications
You can magnify a measured-
value display at a click of the
mouse.