Knick Stratos MS A405 Series - Display in Measuring Mode

20
enter key
meas key
approx. 2 s
By pressing meas briey you can step through
further displays such as primary value or tag
number (TAG).
After 60 sec they switch back to the main
display.
Press enter to select a display as
MAINDISPLAY (displayed permanently in
measuring mode).
The secondary display shows
“MAINDISPLAY – NO”.
Use the UP / DOWN arrows to select
“MAINDISPLAY – YES”
and conrm by pressing enter.
This display is now shown in measuring
mode.
The MAIN DISPLAY is the display which is
shown in measuring mode. To call the mea-
suring mode from any other mode, hold the
meas key depressed for at least 2 sec.
Display in Measuring Mode