26
Step Action/Display Remark
Connect sensor
When no Memosens sensor is
connected, the error message
“NO SENSOR” is displayed.
Wait until the sensor data
are displayed.
MEMO
SENS
The hourglass in the display
blinks.
Check sensor data
MEMO
SENS
View sensor information
using keys, conrm
using enter.
Sensoface is friendly when the
sensor data are okay.
Go to measuring mode Press meas, info or enter
After 60 sec the device auto-
matically returns to measuring
mode (timeout).
Possible error message
Sensor defective.
Replace sensor
When this error message
appears, the sensor cannot be
used.
Sensoface is sad.
Connecting a Memosens Sensor
To Next Page
Loading...
