Knick Stratos MS A405 Series - Relay Contacts: Controlling a Rinsing Probe

56
Relay Contacts: Controlling a Rinsing Probe
(Example: relay 1)
1 Press menu key.
2 Select CONF using ,
press enter.
3 Select RELAY1 menu using  keys,
press enter.
Specify relay contact function: WASH.
4 All items of this menu group are indicated by the
“WS1:“code.
Press enter to select menu,
edit using arrow keys (see next page).
Confirm (and proceed) by pressing enter.
5 Exit: Press meas key until the [meas] mode indicator is
displayed.
Conguring the Relay Contacts
Function
Cleaning interval
Cleaning duration
Relax time
Contact type
4
enter