54
Use of relays
Alarm
Contact response
Relay Contacts: Alarm
(Example: relay 1)
1 Press menu key.
2 Select CONF using ,
press enter.
3 Select RELAY1 menu using keys,
press enter.
Specify relay contact function: ALARM.
4 All items of this menu group are indicated by the
“AL1:“code.
Press enter to select menu,
edit using arrow keys (see next page).
Confirm (and proceed) by pressing enter.
5 Exit: Press meas key until the [meas] mode indicator is
displayed.
Conguring the Relay Contacts
To Next Page
Loading...
