Knick Stratos MS A405 Series - Selecting Mode; Entering Values

21
To enter a value:
5) Select numeral: left / right arrow
6) Change numeral: up / down arrow
7) Conrm entry by pressing enter
To select the operating mode:
1) Hold meas key depressed (> 2 s) (measuring mode)
2) Press menu key: the selection menu appears
3) Select operating mode using left / right arrow key
4) Press enter to conrm the selected mode
Selection menu
Selected mode
(blinks)
1
4
3
2
5
7
6
Selecting the Mode / Entering Values