Knick Stratos MS A405 Series - Wiring Example SE 670; SE 680

16
Sensor, M12 connector
Wiring Example SE 670 / SE 680
White Brown Yellow
Transparent
Green
Cable Device
Connect the SE 670 / SE 680 sensor to the RS-485 interface of the device. When
SE670/ SE 680K is selected as sensor in the Conguration menu, the default values
are taken as calibration data. They can then be modied by calibration.
All calibration data of the SE 680M sensor with Memosens protocol are stored in the
sensor.
Cable types:
M12/ferrules
5 m
10 m
20 m