Knick Stratos MS A405 Series - Displaying Calibration and Sensor Data

74
Diagnostics
Display Menu item
Displaying the calibration data
Select CALDATA using, confirm by pressing enter.
Use thekeys to select the desired parameter from the bottom
line of the display (LAST_CAL / CELL / ZERO / INSTALL).
The selected parameter is shown in the upper display line.
Press meas to return to measurement.
Displaying the sensor data
Manufacturer, type, serial number and last calibration date.
In each case Sensoface is active.
Display data using  keys,
return by pressing enter or meas.