2-6
☞
The Auto flash setting will not respond when using a Manual Exposure
shutter speed of 1/250 to 1/500 seconds. Set the flash to Fill if a flash is
needed at those shutter speeds.
To change the Exposure setting:
1
Turn the camera on and press the TAB button twice to highlight the Auto
Exposure setting or three times to highlight the Manual Exposure setting.
The Auto Exposure or Manual Exposure icon blinks.
2
Press the SELECT button to scroll through the Auto Exposure plus (+) or
minus (-) settings or to adjust the Manual Exposure setting.
3
Press the ENTER button to select the appropriate exposure setting.
The exposure icon is changed to the selected exposure setting.
The selected Exposure setting returns to the default setting when the camera is
turned off.
To Next Page
Loading...
Need help?
General
