Kodak ESP 7 ALL-IN-ONE PRINTER User Manual

Printer Overview
16 Kodak ESP 7 Printer User Guide
Memory Card Slot Light
Light Status Cause Action/Solution
Off Either the memory card is not
inserted or is improperly inserted in
the card slot.
Remove and reinsert the memory card.
Blinks The internal card reader is
initializing or communicating with a
memory card.
None.
On A memory card is properly inserted
in the card slot.
None.
Attention Light
Light Status Error
Off None.
Blinks (slow)
The LCD screen
describes the
error.
Paper jam.
Paper tray empty.
Paper carriage stall.
Paper size or type mismatch.
Change ink cartridge.
Ink cartridge not readable.
Printhead not calibrated.
Unit open, scanner lid open, rear access door open.
Too many image sources.
Printhead not installed.
Unable to read memory card or USB host device.
Blinks (fast) Ink cartridge(s) inserted incorrectly.
Ink cartridge(s) not installed.
On Media sensor failure.
Printhead failure.
Scanner failure.

Kodak ESP 7 ALL-IN-ONE PRINTER Specifications

General

Brand	Kodak
Model	ESP 7 ALL-IN-ONE PRINTER
Category	All in One Printer
Language	English