Chapter 9
Kodak ESP 7 Printer User Guide 79
4 Check the box that says “Run the program as an administrator”.
Print troubleshooting
Use this section to resolve print problems.
Envelope printing incorrect
Probable Cause
The envelopes are not loaded correctly.
Corrective Action
1 Remove the envelopes from the paper tray.
2 Straighten the stack of envelopes against a flat surface. Reload the stack into the paper
tray print side down, with the envelope flap aligned to the left.
3 Squeeze the paper guide and slide it to the right until it touches the edge of the
envelopes.
Multiple-page document not printing in reverse order
(Windows only)
Probable Cause
The print settings on your computer are set to print the first page of your document first.
Corrective Action
Configure the printer to print the document in reverse order, so the pages are in the correct
order when printing is complete.
To set a Windows PC to print in reverse order:
1 On the Windows Desktop, click
Start > Settings > Control Panel.
2 In the Control Panel window, open Printers or Printers and Faxes.
3 In the Windows Explorer window, Right-click on the Kodak All-in-One printer in the
Name column, and then select Printing Preferences.
4 On the Printing Preferences window, select
Print last page first on the General tab.
Multiple-page document not printing in first-page-first order
(Macintosh only)
Probable Cause
The print settings on your computer are set to print the document in reverse order.
Note: On a Macintosh, Reverse Page Order printing is the default setting. See “To
set a Macintosh to print the first page of a document first:” below.
To Next Page
Loading...
