Viewing and Printing Photos
48 Kodak ESP 7 Printer User Guide
Zooming and cropping photos
Your printer enables you to zoom in or out on a specific area of a photo. When you print 
the photo, the photo is cropped so only the area bounded by the crop boundaries is 
printed.        
1 Select an image from the display. As needed, see “Printing photos from non–PictBridge 
digital cameras, memory cards, and USB flash drives” on page 44.
2 As desired, press 
Menu to display the Print Photos Options menu. The first option is 
Print Size. Press the
andnavigation buttons on the control panel to change the size 
of the output that you want for the image, which will affect the zoom and crop displays. 
Press 
OK when you are satisfied.
3  Press 
Zoom + to enable the zoom and crop function. You can enlarge the photo in .25X 
increments, up to a 5X magnification. Press 
Zoom – to decrease the magnification in 
.25X increments, to 1X.       
4 Use the
, 
, andnavigation buttons on the control panel to display the part of 
the picture you want to print.
5 Press 
OK when finished. The photo is displayed with the original view, and a border 
(“crop box”) is displayed around the area you want to use.
6 If you are satisfied with the image shown, press 
Start to print the area displayed in the 
crop box. If you want to specify additional print parameters for the photo, press 
Menu 
to display the 
Print Photos Options menu. A sample of the menu is shown in the 
illustration below.
Caution: You cannot use the zoom or crop functions of this printer on photos 
located on a PictBridge camera connected to the printer. All changes made to 
photos stored on PictBridge camera are conducted on the camera.
Note: The changes you make to the photo apply only to viewing and printing the 
photo, and will not be saved on the memory card or storage device.
Note: The changes you make to the photo apply only to viewing and printing the 
photo; they are not saved on the memory card or storage device.
Tip: You can make more precise zoom and crop adjustments to your photos on 
your computer using photo editing software. To send a photo from the All-in-One 
printer to your computer, see “Transferring images to a computer” below.