Chapter 9
Kodak ESP 7 Printer User Guide 91
Probable Cause 3
The SSID is not visible because it is at the bottom of the list.
Corrective Action
Press
to scroll to the bottom of the list. Infrastructure entries are listed first and ad hoc
entries last.
Probable Cause 4
The access point firmware needs updating.
Corrective Action
Check for firmware updates for your access point on the manufacturer's web site. Update
the firmware on the access point.
Probable Cause 5
Your wireless adapter on your computer is not broadcasting the SSID (ad hoc).
Corrective Action
Verify that the wireless adapter is broadcasting the SSID. Print a network configuration
page from the All-in-One printer, and verify that the SSID for the wireless adapter appears
on the network configuration page. If the wireless adapter is not broadcasting the SSID, see
the documentation that came with your computer.
Probable Cause 6
The firmware for the wireless adapter on your computer needs updating (ad hoc).
Corrective Action
Check for firmware updates for your wireless adapter on the manufacturer's Web site, and
then update the firmware.
Probable Cause 7
An Ethernet cable is connected to the printer.
Note: Devices like wireless speakers or wireless gaming accessories can emit
radio interference at 2.4 GHz. You can verify this on your wireless desktop or
laptop computer by viewing sporadic signal bars in your Wi-Fi status utility.
Repositioning your computer away from these sources of signal interference can
improve your computer network performance. For example:
• Do place the AP/router in a central room.
• Do not place wireless entertainment devices between the AP/router and
wireless computer.
• Do not place wireless entertainment devices between the AP/router and Wi-Fi
All-in-One printer.
To Next Page
Loading...
