A-61670 August 2014 1-7
Front printer access view:
all models
Even if you do not have the Kodak Enhanced Printer Accessory, you will still
need to access this area of the scanner. The feed module release knob is
located in this area.
1 Feed module release knob — turn this knob to release the feed module
from it’s position for cleaning or replacement. Turn the arrow to right to
disengage the feed module.
The following components are for front printing and are only present if the
Enhanced Printer Accessory is installed.
2 Enhanced Printer carrier/cartridge — allows printing on documents.
3Printer cable — this cable connects directly to the printer carrier to allow
communication to the Enhanced Printer.
4 Print positions — the i5000 Series Scanners allow front printing on your
documents. Up to 39 positions are available when using the front printer.
Rear printer access view:
i5850 Scanner only
The following components are for rear printing and are only present if the
Enhanced Printer Accessory is installed.
1Printer cable — this cable connects directly to the printer carrier to allow
communication to the Enhanced Printer.
2 Enhanced Printer carrier/cartridge — allows printing on documents.
3 Print positions (located on the underside of the rail) — the i5850
Scanner has the capability of front and rear printing. Up to 24 print
positions are available when using the rear printer. Only one printer (front
or rear) can be used at a time.
To Next Page
Loading...
