Kodak i5000 Series - Connectivity, Environment, and Power; System Requirements

A-2 A-61670 August 2014
System requirements Following is the recommended system configuration to run Kodak i5000 Series
Scanners.
For i5200/i5600/i5800/i5850 Scanners
• PC: Intel® Core™ 2 Duo 3GHz, 4GB RAM, USB 2.0 or higher
For i5200V/i5600VScanners
• PC: Intel® Core™ Quad, 3GHz, 4 GB RAM, USB 2.0 or higher
Supported operating systems:
• Microsoft Windows XP (Professional); SP2
• Microsoft Windows Vista; SP1
• Microsoft Windows Vista x64 Edition
• Microsoft Windows 7 (32- and 64-bit)
• Microsoft Windows 8 (32- and 64-bit)
• Microsoft Windows 8.1 (32- and 64-bit)
Included Drivers:
• Windows operating systems: TWAIN, ISIS, WIA
VRS (for Kodak i5200V and i5600V Scanners only)
Power Consumption -
Scanner
Idle - not imaging: <115 watts (all models)
Running - imaging:
<215 watts (i5200/i5600/i5200V/i5600V Scanners)
<250 watts (i5800 Scanner)
Low Power mode: <4 watts
Standby: <1.0 watts
Acoustic Noise
(Sound Pressure level at
Operator Position)
Scanning: less than 67 dB(A)
Standby: less than 42.3 dB(A)
Electrical rating i5200/i5600/i5200V/i5600V: 1/N/PE ~ 100 -240 VAC 2.8 - 1.5A 50/60 Hz
i5800/i5850: 1/N/PE ~ 100 -240 VAC 3.3 - 1.5A 50/60 Hz