3-10 A-61670 August 2014
Scan job overrides The Overrides screen allows you to temporarily override your scan job setup
for Multifeed Detection, Multifeed Sensors, Printing, Print Offset, Maximum
Document Length and Document Handling for the remainder of the scan job.
NOTE: Maximum Document Length is not available on the i5200V/i5600V
Scanners.
To access the overrides screen at the start of each scan job, the auto start
setting in the scanning application must be disabled. See the section entitled,
“Scanning documents” earlier in this chapter for more information.
When you pause the scanner, the Overrides button is available on the
touchscreen.
To override a setting:
1. Touch Overrides on the Paused screen. The Overrides screen will be
displayed.
NOTE: Use the scroll bar to show all options.
2. Touch the option that you want to override, then touch Close to continue
scanning.
To Next Page
Loading...
