4-2 A-61670 August 2014
Printer specifications More information about the following specifications can be found in the
Scanning Setup Guide for the TWAIN Datasource, ISIS Driver or VRS.
Characteristic Description
Maximum lines 1
Maximum characters 40 (including spaces)
Print locations (horizontal) Up to 39 front manually set
Up to 24 rear manually set - i5850 Scanner
only
Print locations (vertical) Set by the scanning application.
Print orientation 0, 90, 180 and 270 degrees
Font size Normal, Bold and Extra Bold
NOTES:
• Not all languages can support a Bold font
based on the complexity of the characters,
such as half-width Katakana.
• Font characters-per-inch can only be
adjusted from x to y by Technical Support.
Font is a custom design.
Print side Front (pre-scan)
Rear (post-scan) - i5850 Scanner only
Minimum printing distance
from document lead edge
0.64 cm (0.25 in.)
Ink cartridge Black: HP-C6602A
Red: HP-C6602R
Green: HP-C6602G
Blue: HP-C6602B
Characters per ink cartridge Up to 1,500,000 to 2,000,000 (based on font
size used).
Static fields available User-specified messages via the scanning
application.
Dynamic fields available Up to a nine-digit sequential document
number, date, four-digit time and Julian date
(and indexing for the i5850 Scanner).
Languages supported Any phonetic language. For example: Dutch,
English, French, German, Italian,
Portuguese, Spanish, Japanese (half-width
Katakana).
To Next Page
Loading...
