Kodak i5000 Series - Paper Specifications and Tips

5-4 A-61670 August 2014
Refer to the following table for best stacking conditions:
Tips for reliable
stacking
In addition to the guidelines outlined in the “Recommended paper
specifications” section, use this tips below to achieve the best possible
stacking results.
• For neater stacking use a jogger to align your document edges before
scanning.
• If you are using patch sheets to separate documents and if the patch sheets
are not separating correctly, you can print your patch sheets on heavier
weight paper. The heavier weight paper will aid in better Stack #2 stacking.
Stack #1
Maximum document stack capacity 1 inch (25 mm): Typically 200 documents, new
condition, 20 lb. bond.
Maximum document length: landscape (when scanning a
variety of paper types and conditions)
8.5 inches (215 mm): US lettersize
Maximum document length: portrait (when scanning only
recommended paper types in good condition)
11.7 inches (297 mm): A4 letter
Maximum paper width (landscape) 11.7 inches (297 mm): A4 letter
Minimum paper width 2.5 inches (63 mm)
Minimum paper length 2.5 inches (63 mm)
Stack #1 (with short document insert)
Maximum document stack capacity 1 inch (25 mm): Typically 200 documents, new
condition, 20 lb. bond.
Maximum paper length 5.85 inches (148 mm)
Maximum paper width 11.7 inches (297 mm)
Stack #2
Maximum document stack capacity 1 inch (25 mm): Typically 200 documents, new
condition, 20 lb. bond.
Maximum document length: landscape (when scanning a
variety of paper types and conditions)
8.5 inches (215 mm): US lettersize
Maximum document length: portrait (when scanning only
recommended paper types in good condition)
11.7 inches (297 mm): A4 letter
Maximum paper width (landscape) 11.7 inches (297 mm): A4 letter
Minimum paper width 5.5 inches (139 mm)
Minimum paper length 5.5 inches (139 mm)