Ngenuity TWAIN Data Source November 19, 2009
Page 15 of 99
When user click on existing profile:
“Load from” will load the settings from selected profile.
“Update” will store current settings in selected profile.
“Delete” will delete selected profile.
“Export to file” will save selected profile in an external file.
3.2 I
NTERACTIVE EXCEPTION HANDLING
The scanner User Interface includes interactive handling of the most common scanner errors or
conditions.
This is a productivity feature where, during Scan and upon detection of one of the following scanner
exception, the TWAIN data source UI shows an interactive UI (see below).
This UI reports the scanner error and a short text description explaining the recovery steps.
Following those instructions, the Scanner Operator (typically) uses the Scanner Control Panel to clear
the exception and then the scanner automatically resumes scanning automatically.
The scanner control panel is located in front of the scanner device for easy operator access and quick
recovery of those exceptions without going back to the Scan Application.
3.2.1 Multifeed detected
3.2.2 Paper Jam
3.2.3 Skimmer Out of Service
To Next Page
Loading...
