Kodak Ngenuity 9090DB - Bbh_Cap_Cam_Negative; Bbh_Cap_Cropheight

Ngenuity TWAIN Data Source November 19, 2009
Page 72 of 99
Query Support Value:
TWQC_GET |TWQC_GETDEFAULT |TWQC_GETCURRENT | MSG_SET| MSG_RESET
Stored in registry:
Yes
Stored in profile:
Yes
3.8.19 BBH_CAP_CAM_NEGATIVE
If set, the scanner assumes the image is primarily a dark image with light text (reverse image input).
This setting is ignored when scanning in color mode.
Type:
TW_BOOL
Supported Messages:
MSG_GET - TW_ENUMERATION (for 2.0 applications), TW_ONEVALUE (for
<2.0Applications)
MSG_GETCURRENT - TW_ONEVALUE
MSG_GETDEFAULT - TW_ONEVALUE
MSG_RESET – TW_ONEVALUE
MSG_SET – TW_ONEVALUE, TW_ENUMERATION
MSG_QUERYSUPPORT - TW_ONEVALUE
Allowed Values:
FALSE, TRUE
Default Value:
FALSE
Query Support Value:
TWQC_GET |TWQC_GETDEFAULT |TWQC_GETCURRENT | MSG_SET| MSG_RESET
Stored in registry:
No
Stored in profile:
Yes
3.8.20 BBH_CAP_CROPHEIGHT
If set, automatic length detection (vertical cropping) is enabled. It can be different on deferent
windows.
Setting ICAP_AUTOMATICBORDERDETECTION will set this capability. Resetting
ICAP_AUTOMATICBORDERDETECTION will reset this capability.
Type:
TW_BOOL