Kodak Ngenuity 9090DB - Bbh_Cap_Doc_Mode; Bbh_Cap_Doc_Very_Long

Ngenuity TWAIN Data Source November 19, 2009
Page 75 of 99
0in to 1.7in (0 to 43mm)
Default Value:
0in (0mm)
Query Support Value:
TWQC_GET |TWQC_GETDEFAULT |TWQC_GETCURRENT | MSG_SET| MSG_RESET
Stored in registry:
Yes
Stored in profile:
Yes
3.8.24 BBH_CAP_DOC_MODE
Specify paper type to be scanned. It may affect scanning speed.
Type:
TW_UINT8
Supported Messages:
MSG_GET - TW_ENUMERATION
MSG_GETCURRENT - TW_ONEVALUE
MSG_GETDEFAULT - TW_ONEVALUE
MSG_RESET – TW_ONEVALUE
MSG_SET – TW_ONEVALUE, TW_ENUMERATION
MSG_QUERYSUPPORT - TW_ONEVALUE
Allowed Values:
DOC_MODE_NORMAL = 0
DOC_MODE_FRAGILE = 1
DOC_MODE_THICK = 2
DOC_MODE_TRIFOLD = 3
Default Value:
DOC_MODE_NORMAL
Query Support Value:
TWQC_GET |TWQC_GETDEFAULT |TWQC_GETCURRENT | MSG_SET| MSG_RESET
Stored in registry:
Yes
Stored in profile:
Yes
3.8.25 BBH_CAP_DOC_VERY_LONG
If set, split page into segments. Segments are the size of the paper selected in the ICAP_FRAME
Type: