Kodak Ngenuity 9090DB - Bbh_Cap_Prn_Cnt_Step

Ngenuity TWAIN Data Source November 19, 2009
Page 81 of 99
Type:
TW_UINT8
Supported Messages:
MSG_GET - TW_ENUMERATION
MSG_GETCURRENT - TW_ONEVALUE
MSG_GETDEFAULT - TW_ONEVALUE
MSG_RESET – TW_ONEVALUE
MSG_SET – TW_ONEVALUE, TW_ENUMERATION
MSG_QUERYSUPPORT - TW_ONEVALUE
Allowed Values:
1 to 9 (Read from scanner)
Default Value:
1
Query Support Value:
TWQC_GET |TWQC_GETDEFAULT |TWQC_GETCURRENT | MSG_SET| MSG_RESET
Stored in registry:
Yes
Stored in profile:
Yes
3.8.34 BBH_CAP_PRN_CNT_STEP
Step / increment amount for the counter. Every time it is to be incremented (based upon the other
settings) this value will be added to the counter value. It can be different on different printers.
Type:
TW_UINT8
Supported Messages:
MSG_GET - TW_ENUMERATION
MSG_GETCURRENT - TW_ONEVALUE
MSG_GETDEFAULT - TW_ONEVALUE
MSG_RESET – TW_ONEVALUE
MSG_SET – TW_ONEVALUE, TW_ENUMERATION
MSG_QUERYSUPPORT - TW_ONEVALUE
Allowed Values:
1 to 9 (Read from scanner)
Default Value:
5
Query Support Value:
TWQC_GET |TWQC_GETDEFAULT |TWQC_GETCURRENT | MSG_SET| MSG_RESET
Stored in registry: