Kodak Ngenuity 9090DB - Bbh_Cap_Doc_High_Skew; Bbh_Cap_Doc_Ignore_Hole

Ngenuity TWAIN Data Source November 19, 2009
Page 74 of 99
Stored in profile:
Yes
3.8.22 BBH_CAP_DOC_HIGH_SKEW
If set, the host expects that documents will be fed with a high skew and proper compensation
(typically slowing down or telling the scanner) must be performed.
Type:
TW_BOOL
Supported Messages:
MSG_GET - TW_ENUMERATION (for 2.0 applications), TW_ONEVALUE (for
<2.0Applications)
MSG_GETCURRENT - TW_ONEVALUE
MSG_GETDEFAULT - TW_ONEVALUE
MSG_RESET – TW_ONEVALUE
MSG_SET – TW_ONEVALUE, TW_ENUMERATION
MSG_QUERYSUPPORT - TW_ONEVALUE
Allowed Values:
FALSE, TRUE
Default Value:
FALSE
Query Support Value:
TWQC_GET |TWQC_GETDEFAULT |TWQC_GETCURRENT | MSG_SET| MSG_RESET
Stored in registry:
Yes
Stored in profile:
Yes
3.8.23 BBH_CAP_DOC_IGNORE_HOLE
Size of hole to ignore. If greater than 0, the scanner paper sensor should ignore holes in the page
Type:
TW_ FIX32
Supported Messages:
MSG_GET - TW_RANGE
MSG_GETCURRENT - TW_ONEVALUE
MSG_GETDEFAULT - TW_ONEVALUE
MSG_RESET – TW_ONEVALUE
MSG_SET – TW_ONEVALUE, TW_RANGE
MSG_QUERYSUPPORT - TW_ONEVALUE
Allowed Values: